Maximise Flavour and Extend Coil Life with Our Comprehensive Coil Care Techniques
Setting out to enhance your vaping experience and ensure the longevity of your vape coils is essential for any vaping enthusiast in the UK. The cornerstone of a superior vaping session lies not only in the quality of the e-liquid but also in the state of the vape coil. Over time, residues from e-liquids, particularly those high in vegetable glycerine, sweeteners, and specific darker flavourings, can accumulate on your coils. This build-up not only diminishes the vapour’s quality and the purity of the flavour but can also lead to an undesirable burnt taste, marring the overall vaping experience.
However, the repercussions of residue accumulation extend beyond just the quality of your vaping sessions. Coils clogged with gunk operate less efficiently, necessitating more power to heat up, which can strain your device’s battery and lead to more frequent charging. Moreover, a dirty coil can become a hotbed for bacteria and germs, posing a health risk.
Regular and thorough cleaning of your vape coils addresses these issues, reviving your device’s performance to its prime. By maintaining clean coils, vapers can savour the true, unadulterated flavour of their e-liquids, as well as enjoy dense, satisfying vapour production. Additionally, proper coil maintenance can significantly prolong the lifespan of your coils. Considering the cost of replacement coils, which can vary from a few pounds to over £20 for more sophisticated models, the financial advantages become clear. By doubling or even tripling the usable life of each coil, you could potentially save hundreds of pounds over a year, depending on your vaping frequency.
Furthermore, mastering coil cleaning is a valuable skill that fosters a more sustainable vaping practice. Instead of discarding coils at the first sign of a performance drop-off, cleaning them can often restore their functionality, reducing waste and environmental impact.
The benefits of rinsing and cleaning your vape coils are manifold. Not only does it guarantee the best possible vaping experience by maintaining the purity of flavours and the volume of vapour, but it also offers significant cost savings over time. Additionally, by extending the life of your coils, you contribute to a more environmentally friendly vaping practice. Let’s delve into the expert techniques that will help you achieve this, ensuring your coils last longer and perform better, all while keeping extra money in your pocket.
Elevate Your Vaping Experience Through Coil Maintenance
Why Cleaning Your Tank and Coil Together Enhances Your Vape
Commencing the cleaning process with your tank not only sets a solid foundation for coil maintenance but is particularly advisable when switching e-liquid flavours to avoid flavour contamination. Simplifying tank cleaning involves disassembling the tank, rinsing each component under warm water, drying with a paper towel, and allowing everything to air-dry completely, ensuring a fresh base for your vaping pleasure.
Revitalise Your Coils for Optimal Performance and Longevity
Different types of coils necessitate distinct cleaning approaches to maintain their condition and functionality. Whether you have replaceable coil heads or rebuildable coils, understanding the right cleaning method is key to achieving the ultimate vape experience.
For Replaceable Coil Heads:
Cleaning replaceable coil heads can be tricky due to their design, but with the right approach, you can extend their life and improve your vaping experience. Here’s a more detailed method:
1. Soaking the Coils: Begin by soaking your coils in ethanol, vinegar, or vodka for at least two hours. Ethanol is preferred for its purity, but if unavailable, plain vodka or white vinegar are effective alternatives for dissolving e-liquid residues. This step loosens the gunk built up from vaping.
2. Rinsing: After soaking, rinse the coils thoroughly under tap water to wash away the loosened deposits. Ensure that the water runs through all parts of the coil to remove any remnants of the cleaning solution.
3. Distilled Water Rinse: Following the initial rinse, immerse the coil in distilled water. This step is crucial as distilled water is free from impurities and minerals found in tap water, ensuring no residue is left on the coil that could affect its performance.
4. Drying the Coil: Gently blow air through the coil to remove excess water. Use a clean, dry cloth or cotton swab to dab away any visible moisture. Finally, leave the coil to air-dry completely on a paper towel. This may take several hours but is essential to prevent any water from diluting your e-liquid or causing damage to your device.
5. Reassembly and Priming: Once dry, reassemble your device, ensuring everything is securely in place. Prime the coil by applying e-liquid directly to the wick material, allowing it to soak in thoroughly before use. This step is crucial to prevent dry hits and ensure optimal performance from the first puff.
For Rebuildable Coils:
Rebuildable coils offer the advantage of being easier to clean and maintain due to their design. Follow these steps for a deep clean:
1. Wick Removal and Dry Burning: Carefully remove the wicks from your coils. Then, perform a light dry burn by pulsing the fire button a few times. This process burns off e-liquid residue without overheating the coils. Ensure the coils glow evenly from the inside out, indicating they are clean.
2. Rinsing and Brushing: Hold the coil under running water to rinse away any ash or residue. Use a soft brush or a dedicated coil cleaning tool to gently scrub the coil. An old toothbrush works well for this purpose, reaching into the nooks and crannies of the coil without damaging it.
3. Final Dry Burn: After rinsing, give the coils a final dry burn to evaporate any remaining water droplets. This step also ensures that the coils are completely clean and ready for re-wicking.
4. Re-wicking: When the coils are dry and cool, re-wick with fresh cotton. Ensure the cotton is snug but not overly tight within the coil. Trim the ends and tuck them into the build deck, making sure there’s enough space for air to flow.
5. Priming the New Wick: Saturate the new wick with e-liquid, allowing it to soak in fully. Assemble your device and fill the tank. Allow it to sit for several minutes to ensure the wick is fully saturated before vaping.
These vape maintenance tips not only amplify your vaping experience by restoring coil functionality and flavour but also contribute to a longer coil lifespan, reducing the need for frequent replacements.
Key Takeaways for Vape Coil Care
While flavours like menthols and certain sweets can leave a lasting imprint on your coils, making a switch without lingering aftertastes might require a new wick or coil. Additionally, after rinsing, ensuring complete drying of the coil is crucial to avoid inhaling any residual cleaning substances.
For prebuilt coil users unable to dismantle their coils, an overnight alcohol soak, followed by a warm water rinse and thorough drying, can significantly extend coil life, reinforcing the value of coil care in enhancing the overall vaping experience.
By adopting these detailed coil cleaning practices, you affirm your commitment to quality vaping, underscoring the importance of maintenance in achieving the perfect vape session every time.