If you are using a vape device, then it is important to maintain the device in good condition. This is a must so the device can perform smoothly. Well-maintained device will also improve your vaping experience. The maintenance steps can be performed by anyone, manually.
You can also check with IVG 2400 maintenance guide online. If the device is expensive, then you have to take precautions. This helps prevent the damage that may be caused to the device.
·Battery levels
·People often don’t realize the importance of maintaining battery health
·If the battery is worn out the device may not heat the coil
·The vapor quality is poor if the battery is weak
Before you switch on the device, you have to check the condition of the battery. It is important to check if the battery is fully charged or not. You have to replace poor performing battery immediately.
·Tank inspection
The vape device has a tank installed. You have to fill the tank with quality vape juice. The tank should always be cleaned before use. If you are using different vape juice every time, then wash the tank before you can refill it with e-juice.
Before you switch on the vape device, you have to ensure that the tank does not leak. It is also best practice to wipe the tank completely before fitting in the vape device. Try to clean the tank with hot water every time before refilling.
·Coil inspection
The coil is one of the most important components of the vape device. The coil will heat up and produce quality vapor. The coil should be in good condition so it can heat up instantly. If the coil is not good then it may never reach to expected temperature value.
You should only select premium quality vape devices like Hayati Pro Max. If the device is good then it has the best quality coil installed. You also have to replace the coil if it is worn out. You have to keep in mind that even the best quality vape device will have a disposable coil installed.
·Mod surface
This is important if you are using a Mod device. Before you continue using the device, you have to wipe its surface. This will always clean the surface of any debris. The dust and debris can easily stick to the outer surface of the device.
You also have to check with the adjusting you have on the device. Any modern time vape device will have multiple settings so you can enjoy customized vaping. The temperature of the device can be controlled easily.
·Default settings
Yes, this is true. The vape device will always come with a store setting if you purchase a new device. This setting is the best as you may not need to change this if you are using normal vape ejuice. If you are new to vaping then you should never change this setting unless you are a pro.
When you purchase a new vape device, you should note and maintain the default settings. Be sure you have this setting noted with you in the notebook. When you use the device, just check the setting of the device.